Category: Windows Errors

Welcome to our guide on how to fix error code 0x1000008e BSOD problem. Our instructions will help troubleshoot the cause of the issue and will provide the appropriate method to fix it.

It can be very unnerving to have your PC crashing without any apparent reason and booting into the infamous Blue Screen of Death (BSOD). There’s a considerable number of different reasons that might be causing this to happen. The problem could be coming from your computer’s hardware or it might be entirely software-related. There are several general guidelines when troubleshooting a BSOD crash and error code 0x1000008e is no exception. Usually, if you are getting this specific error code within the crash screen, then the issue is likely coming from your RAM or one of your hard-drives.

Error Code 0x1000008e BSOD Fix

The Guide

 Error Code 0x1000008e may be caused by a faulty HDD/RAM

This is a common method for troubleshooting errors and issues related to corrupted or missing system files. The following guide will show you how to use this command.

1. Press Winkey to open the Start Menu and type cmd.                 
2. Right-click on the first search result and select Run as Administrator from the drop-down list.
   
3. In the resulting command line window, type the command sfc/scannow and press Enter.
   
4. The scanning process will commence and you will have to wait a couple of minutes until it’s finished (it might take some time).
   
5. Once it’s done, you will be shown one out of three possible messages within the command line:
6. If the message was Windows Resource Protection did not find any integrity violations, then the cause for the 0x1000008e BSOD error isn’t related to corrupted system files. If Windows Resource Protection found corrupt files and successfully repaired them was displayed, then it is likely that the issue has been solved and you should no longer get the BSOD screen. If the message shown read Windows Resource Protection found corrupt files, but could not repair them, then you should try another method for fixing your system files such as a system repair, refresh or an in-place upgrade (links for those articles).

Check for Error Code 0x1000008e using Check Disk

This function is used to scan your hard-drives for any bad sectors, which might be the cause behind the 0x1000008e error. It is one of the most common troubleshooting suggestions used for fixing BSOD system crashes. If a bad sector/s is found, Windows will attempt to repair it, which in turn could potentially fix the recurring BSOD error. In this guide you can find detailed instructions on how to use the Check Disc function in order to troubleshoot Blue Screen errors.

Manual disassembly

As we mentioned, the problem might be related to your machine’s hardware and oftentimes the only way to deal with that is to manually test your hardware components. Since RAM issues are one of the most common causes for the 0x1000008e error, it is a good idea to open your PC case and take a look at your RAM sticks. If any of them are physically damaged or not tightly fitted inside their slots, this could be the cause for your system instability. At first sight, there might not be a visible issue with the sticks. Therefore, we advise you to manually remove them one by one, while booting your PC in the meantime and waiting to see if a BSOD occurs. That way you can manually determine if a specific RAM stick is being faulty. If this method yields any results and you find out that one or more sticks are causing your PC to crash, remove them and either run your machine without them (at the expense of having less RAM) or buy new ones to substitute for the problematic/damaged hardware.

Test for Error Code 0x1000008e with Memtest86

A much better and more effective alternative to the manual RAM check is the use of third-party software that will scan your RAM for you. Memtest86 is one such tool that you can download right now for free. However, know that it needs to be burned onto a disk or USB device before you can use it. If you do not know how to do that, use this guide which will show you how to burn bootable devices. After you’ve created your own bootable CD/USB, put it inside your machine and restart the computer. Windows should automatically boot from the device that has Memtest86 on it and the RAM scan should commence.

Welcome to our guide on how to fix error code 0x1000008e BSOD problem. Our instructions will help troubleshoot the cause of the issue and will provide the appropriate method to fix it.

It can be very unnerving to have your PC crashing without any apparent reason and booting into the infamous Blue Screen of Death (BSOD). There’s a considerable number of different reasons that might be causing this to happen. The problem could be coming from your computer’s hardware or it might be entirely software-related. There are several general guidelines when troubleshooting a BSOD crash and error code 0x1000008e is no exception. Usually, if you are getting this specific error code within the crash screen, then the issue is likely coming from your RAM or one of your hard-drives.

Error Code 0x1000008e BSOD Fix

The Guide

 Error Code 0x1000008e may be caused by a faulty HDD/RAM

This is a common method for troubleshooting errors and issues related to corrupted or missing system files. The following guide will show you how to use this command.

1. Press Winkey to open the Start Menu and type cmd.                 
2. Right-click on the first search result and select Run as Administrator from the drop-down list.
   
3. In the resulting command line window, type the command sfc/scannow and press Enter.
   
4. The scanning process will commence and you will have to wait a couple of minutes until it’s finished (it might take some time).
   
5. Once it’s done, you will be shown one out of three possible messages within the command line:
6. If the message was Windows Resource Protection did not find any integrity violations, then the cause for the 0x1000008e BSOD error isn’t related to corrupted system files. If Windows Resource Protection found corrupt files and successfully repaired them was displayed, then it is likely that the issue has been solved and you should no longer get the BSOD screen. If the message shown read Windows Resource Protection found corrupt files, but could not repair them, then you should try another method for fixing your system files such as a system repair, refresh or an in-place upgrade (links for those articles).

Check for Error Code 0x1000008e using Check Disk

This function is used to scan your hard-drives for any bad sectors, which might be the cause behind the 0x1000008e error. It is one of the most common troubleshooting suggestions used for fixing BSOD system crashes. If a bad sector/s is found, Windows will attempt to repair it, which in turn could potentially fix the recurring BSOD error. In this guide you can find detailed instructions on how to use the Check Disc function in order to troubleshoot Blue Screen errors.

Manual disassembly

As we mentioned, the problem might be related to your machine’s hardware and oftentimes the only way to deal with that is to manually test your hardware components. Since RAM issues are one of the most common causes for the 0x1000008e error, it is a good idea to open your PC case and take a look at your RAM sticks. If any of them are physically damaged or not tightly fitted inside their slots, this could be the cause for your system instability. At first sight, there might not be a visible issue with the sticks. Therefore, we advise you to manually remove them one by one, while booting your PC in the meantime and waiting to see if a BSOD occurs. That way you can manually determine if a specific RAM stick is being faulty. If this method yields any results and you find out that one or more sticks are causing your PC to crash, remove them and either run your machine without them (at the expense of having less RAM) or buy new ones to substitute for the problematic/damaged hardware.

Test for Error Code 0x1000008e with Memtest86

A much better and more effective alternative to the manual RAM check is the use of third-party software that will scan your RAM for you. Memtest86 is one such tool that you can download right now for free. However, know that it needs to be burned onto a disk or USB device before you can use it. If you do not know how to do that, use this guide which will show you how to burn bootable devices. After you’ve created your own bootable CD/USB, put it inside your machine and restart the computer. Windows should automatically boot from the device that has Memtest86 on it and the RAM scan should commence.

This guide will teach you how to fix Windows 10 Store Error Code 0x80240437. This error code occurs when your PC can’t communicate properly with Microsoft servers.

The reason why you are facing Error Code 0x80240437 is that Microsoft has modified the way Windows communicates with Microsoft Store’s servers after the release of Windows 8 and subsequently Windows 10 As a result, you may often receive this error code when the OS strives to get the download process started. However, it cannot establish a connection between your PC and the Store’s servers. Therefore, your system is not able to download the applications or updates you want or need.

The potential solutions below have been designed to help you get Error Code 0x80240437 resolved. Just make sure that you follow all the instructions closely and try all the offered methods.

Error Code 0x80240437 Fix

The Guide

Error Code 0x80240437 Fix  #1: Load an elevated Powershell

The so-called Powershell represents an automation platform and scripting language that is able to run scripts to allow you to manage your systems in an easier way. Fortunately, there is a script that could help you establish a decent connection to the servers. As a result, you will be able to download applications from the store.

1. Press the Windows key on your keyboard.
   
2. After that, write powershell.
   
   
3. Right-click on the generated result.
4. Select Run as administrator.
   
   
5. Type the commands below into the PowerShell.
6. Execute the commands by pushing Enter right after typing each of them.

PowerShell -ExecutionPolicy Unrestricted $manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation + ‘\AppxManifest.xml’ ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest

AND

PowerShell -ExecutionPolicy Unrestricted -Command “& {$manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation + ‘\AppxManifest.xml‘ ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest}”

7. Bear in mind that several errors may appear during execution , but just disregard them.
8. When the command is done, reboot your PC. Try running the Store again and downloading your apps, you shouldn’t have any problems now.

Error Code 0x80240437 Fix #2:  Try uninstalling and reinstalling your network adapter

Follow the detailed steps in the list below:

1. Hit the Windows and the R keys at the same time.
2. In the generated Run dialog you should type devmgmt.
   
   Complete that step by pushing Enter or pressing OK.
3. The Device Manager will be opened.
4. There you will notice a list of devices, in which locate and expand Network Adapters.
5. Look for your network adapter and right-click it.
6. From the displayed options, go with Uninstall.
7. As soon as the uninstallation process has ended, click on an empty part inside the Device Manager so that you will be able to deselect any device.
8. Open the Action menu.
9. From there select Scan for hardware changes.
10. Please, note that your network adapter could have been enlisted as an Unknown device.
11. Right-click on it. What you should do next is to go with Update Driver Software. Implement all the wizard’s steps. Doing that will automatically install the drivers for it.
12. Finally – restart your machine.
    In the end you should be able to access the Store and download the necessary apps.

Error Code 0x80240437 Fix  #3: Rebooting the Windows Update services might help

To do that, follow the instructions we have prepared for you:

1. Load the Run dialog.
2. After that, what you should write there is msc.
3. Confirm the action by hitting OK.
4. Look for the Windows Update service and the Background Intelligent Transfer service. 
5. Right-click on both of them and after that go with the Stop option.
6. Press R as you are holding the Windows Key.
7. Enter this command: %systemroot%\SoftwareDistribution\.
8. Confirm with OK.
9. Permanently remove everything from the folder.
10. Load the Services window once more.
11. Boot both BITS and Windows Update
12. Finally, you can check whether you are still a victim of this annoying error. You shouldn’t be experiencing it anymore.

Error Code 0x80240437 Fix  #4:  Try checking the settings of your Firewall

What you should know is that in case your Firewall is ON, it could have been programmed to prevent the Windows Update from functioning; or the Windows Store from loading. This might appear to be the source of your problem (the 0x80240437 error). This is essential for all users of enterprise systems and the Surface Hub (it is able to run external firewall software that may demand that you manually install the certificates and add an exception rule for your device to connect via the Store). As a result, disabling your Firewall or changing its settings might help you resolve this error.

 

The article will help you troubleshoot and fix the Groove Music Error 0x801901f4. This error commonly occurs when there is an issue with your Windows store registration.

Reasons for getting the ‘Groove Music Error 0x801901f4

Error 0x801901F4 might be a sign of many things. The most common reason for experiencing such a problem is some kind of a driver error. This article will focus on resolving the Groove Music Error, which can occur with the 0x801901F4 error code  When it comes to this particular case, the error code points to a failed connection between the Windows Store application and Microsoft servers, meaning that there is a problem with the Windows Update.

Such an issue may appear with various Windows applications (like Groove Music); and makes the apps practically useless. Even the Mail App could be influenced by this error. In fact, such apps are not knwon for being stable. As a result, such problems are more or less anticipated, although these applications were introduced long ago.

Fortunately, we are here to offer you a potential solution. Just bear in mind that most of the fixes you can find online will deal with this issue in case it represents a driver-related problem, and not a Windows Store app error. Luckily, we have figured out how to get the problem solved in case Windows Store App is involved. The instructions below will assist you with that task.

Groove Music Error 0x801901f4 Fix

The Guide

Register the Windows Store again

In order to register the Windows Store again, you will have to enter an Administrator Command Prompt. After that you will need to apply a few commands. Simply remember to write the commands in the exact way as they are written in the steps below, because they are usually case-sensitive. It is very important to be careful while implementing the commands and make no mistakes.

1. Push the Windows key (you will find it on your keyboard – it looks like a fragmented flag).
   
   
2. Type cmd in the search bar.
   
3. Right-click the result (instead of opening it).
   
   
4. Select Run as administrator.
   
   
5. Lastly, you should enter the commands below in the Command Prompt window. Follow each one by pushing Enter. By doing that you will execute them.

(1) PowerShell -ExecutionPolicy Unrestricted $manifest = (Get-AppxPackage Microsoft.WindowsStore).InstallLocation +

(2) ‘\AppxManifest.xml’ ; Add-AppxPackage -DisableDevelopmentMode -Register $manifest

6. After implementing the two commands above, exit the Command Prompt.
7. Then restart your computer.
8. Check whether the problem has been resolved. In the usual case, you should have solved the issue by now.

The instructions above have proven effective at solving ‘Groove Music Error 0x801901f4’. However, in your specific case, our guide may not be the tool you need. If this applies to you, you can contact our experts via the comments section below. Make sure to briefly explain your particular situation and we will try to personally resolve it. Also, in case you have already come up with a possible solution, different from the one offered above, please don’t hesitate to share it with all the interested users by letting us know. We will be happy to include it in this article.

 

This guide will help you fix error 0xc0000005. This is an error you can solve yourself, with the help of our instructions.

Error code 0xc0000005 is a common Windows error, which may appear due to many different reasons. In this guide we decided to offer you the best fixes for three of the cases – the “Access Violation error” message, the “application was unable to start correctly” error message and the “MS Office error”. We did our best to offer you solutions, which are tested and easy to follow, and if you repeat them correctly, you will be able to solve the issue yourself and save a few dollars from an expensive PC repair service.

Why do you get Access violation error 0xC0000005?

The 0xC0000005 Access Violation error is a Windows error, which usually appears when you try to run a program that attempts to access a location that is not assigned for its use. The moment you close the error message, the program will close as well. Another reason for getting this code may indicate that the program wants to use system memory improperly. However, there may be many more reasons for the Access violation error 0xC0000005 to occur, such as when you try to install some software, run a certain function or launch system built-in tools.

This is what the message usually states when it appears on your screen:

“An application error has occurred and an application error log is being generated. Exception: access violation (0xC0000005), Address “The application failed to initialize properly (0xC0000005). Click OK to terminate the application”.

The “Stop 0x0000008E (0xC0000005 …) ” combination on the blue screen

What may cause the Access violation error 0xC0000005?

The Windows OS is a complicated system, which is constantly performing multiple processes and tasks. To provide users with the best functionality, the system is constantly distributing memory between the running processes. However, when a particular program attempts to access memory, which is not available for its process and is distributed to another task, the Access violation error 0xC0000005 will occur and the program will quit.

Some common reasons that may cause this disturbing code to appear are related to registry issues, faulty RAM, corrupted drivers, DEP function, a virus infection, failed system security update and many more. If you are using some third party applications, (Symantec Antivirus software was known to cause  the error 0xC0000005), they may also be a reason for the “Access violation error” message to appear and you should update them or contact their developers to get rid of the error. In fact, it is difficult to tell exactly what caused it, that’s why you may need to try different solutions in order to have it solved. Below, we have listed a few, which may be of help, so take a look at them.

Error 0xc0000005 Fix

The Guide

Solution 1: Scan your system for viruses

In case that your computer is infected with some virus or other malware, the 0xC0000005 error may indicate that it is preventing some malicious programs from executing their actions. In many cases, this is one of the common reasons for the “Access violation error” to appear. That’s why we advise you to first run a full system scan to your machine with reputed antivirus software. Don’t forget to get all security updates and latest virus definition to ensure full protection and a precise scan.

Solution 2: Repair the registry

Sometimes, corrupted registry entries and poor system maintenance may cause this error to appear. If you frequently install or uninstall software over old one without properly deleting or uninstalling the remaining files, this may cause some system malfunctions, including error 0xC0000005. To fix it, you will have to check the registry entries and delete all invalid and remaining entries. However, bear in mind that messing with the registry requires some advanced computer skills and if you don’t know what you are doing, it is best to give that task to the computer experts rather than corrupt your system by yourself. Or, you can use some third-party software that is able to repair corrupted registry automatically instead of you repairing it manually. There are such programs on the Internet, and most of them can do a good job.

Solution 3: Disable DEP (Data Execution Prevention)

Data execution prevention is a set of security features, available for Windows users, which is designed to prevent code execution from non-executable memory segments. Usually, its main task is to check memory and protect the computer from viruses. However, some programs may have a conflict with the DEP if it is enabled, which may cause the 0xC0000005 error.

If DEP is the reason for your error code, we suggest you contact the developer of the program that is causing the conflict and ask them for a solution. Another option is to disable DEP for that particular program. This can easily be done if you follow the steps below:

• First, log into the computer as an Administrator in order to have full administrative rights.
• Next, if you are using Windows XP, click the “Start” button and select “Run“. If you are using Windows 7, just press the Windows and R keys together. A run box will open and there you need to type sysdm.cpl and click “OK”.
• Then, a System Properties window will open, where you will need to click on the Advanced tab and then go to Settings.
• Next, the “Performance Options” window will open where you need to click on the “Data Execution Protection” tab. Once there, select the option “Turn on DEP for all programs and services except those I select” and click the “Add” button.
• Now you will need to browse files from the Open applet in order to find the .exe files of the program, that  is causing the error code. Once you find it, select it and click the “Open” button.
• Finally, click “Apply” and “OK” to make the changes take effect.

Solution 4: Remove bad RAM (Random Access Memory) memory

Many times, a bad or incompatible RAM may bring about the Access violation error. If you added a new RAM to your PC in your attempts to improve its performance, you may have started to receive the 0xC0000005. If you remove the memory and restart the computer, this may solve the issue. Before removing the RAM, however, turn off your PC and remove all cables and the battery. Or make sure that it is fully compatible with your computer model and specifications, because if it is not, various issues may appear.

Solution 5: Update Internet Explorer 6.0

Microsoft Internet Explorer 6.0 may also get you this error when you attempt to access an HTML file or web page. The IE browser may stop responding when the 0xC0000005 occurs, especially when the HTML document or website the browser tries to open includes SPAN tags, which are closed incorrectly. To solve this, you will need to update Internet Explorer or use other web browsers such as Google Chrome, Firefox, etc.

The application was unable to start correctly (0xc0000005)

Why do you get “The application was unable to start correctly (0xc0000005)” error message?

Usually, this error appears when you try to run a particular program on your computer, but instead of running, it gives you the following message:

“The application was unable to start correctly (0xc0000005). Click OK to close the application.”

It indicates that the program you are trying to open cannot start. This problem usually occurs because of the DLL, which supports running the program, is not complete, not signed or invalid. In this case even rebooting the system or reinstalling the program won’t fix the error. But here we have prepared for you some fixes that may help.

Fixes for “The application was unable to start correctly (0xc0000005)” error message.

The first thing we advise you to do if you are getting this error message is to scan your system for malware or virus infections and make sure that your computer is not infected. Also, check your RAM and HDD because a problem with them may prevent some programs from working normally. If the error is still present, you can try the following steps:

• First, press the Windows key and the R key together to open Run command.
• Next, type “Regedit” in the search box and press OK. The will open the Registry Editor window.
• Then, follow the path below to navigate to the entry “LoadAppInit_DLLs”:
  HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows\AppInit_Dlls
• Click on “LoadAppInit_DLLs” to open it and modify its value to 0 from 1. Click OK to confirm the changes.
• Finally, restart the computer and try to run the application causing the error. It should be able to start normally without the error code. 

Microsoft Office 0xc0000005

Why do you get the Microsoft Office 0xc0000005 Error code?

The 0xc0000005 Error code may appear when you try to install Microsoft Office but the installation fails to complete. The reasons for that may vary from system file corruption, some previous installation files are not removed completely, or the installation may be blocked by security software, etc. Sometimes even proxy settings or Internet connection may prevent MS Office from being installed. To solve that, try the solutions below:

Solution 1: Try to repair the corrupted files

• First, click the Start button and select “Control Panel”. Next, click on Programs and select Programs and Features.
• Select the Office program in the software list and click “Change“.
• Then, choose the “Quick Repair” option and click “Repair“. If “Quick Repair” does not resolve the problem, then try the “Online Repair” option.

Solution 2: Reset Internet Explorer Security settings

• First, click the Start button, type “inetcpl.cpl” in the search box and press Enter.
• This will open the “Internet Properties” window, in which there is a “Security” tab. Click on it.
• Next, click on “Reset all zones to default level” button and click OK. This should get the error message solved.

Solution 3: Disable Proxy

• First, you will need to open the Command Prompt. Press the Windows and R keys together and type “cmd” in the Run box and click OK.
• In the Command Prompt type the following command: netsh winhttp import proxy source=ie
• Next, press Enter and if you get a message stating “Error writing proxy settings. (5) Access is denied”, this means that you should disable the Proxy settings in Internet Explorer.
• For that, launch Internet Explorer, click the Tools button and then the Internet Options.
• Next, click the Connections tab and select “LAN settings“. Choose “Use a proxy server for your LAN“.
• Finally, type the address of the proxy server in the Address box and type the port number in the Port box. If your network demands separated address for different services ( HTTP, FTP, etc.), click the Advanced button to enter the required addresses. Then click OK to save the changes.

Solution 4: Register DLL Dependencies

Sometimes, during Windows update or MS Office installation, the DLL (Dynamic Link Library) may get lost or not get registered normally in the system. To register the lost DLL, open the Run box by pressing the Windows and R keys together and simply type the following command:  regsvr32 Officevalidator.dll Click Ok and you will be good to go.

Did we help? If yes, please feel free to share this with others and if you know some other solutions for the 0xc0000005 Error code, we would love to hear about them in the comments below.

 

This guide will help you fix error 0xc0000005. This is an error you can solve yourself, with the help of our instructions.

Error code 0xc0000005 is a common Windows error, which may appear due to many different reasons. In this guide we decided to offer you the best fixes for three of the cases – the “Access Violation error” message, the “application was unable to start correctly” error message and the “MS Office error”. We did our best to offer you solutions, which are tested and easy to follow, and if you repeat them correctly, you will be able to solve the issue yourself and save a few dollars from an expensive PC repair service.

Why do you get Access violation error 0xC0000005?

The 0xC0000005 Access Violation error is a Windows error, which usually appears when you try to run a program that attempts to access a location that is not assigned for its use. The moment you close the error message, the program will close as well. Another reason for getting this code may indicate that the program wants to use system memory improperly. However, there may be many more reasons for the Access violation error 0xC0000005 to occur, such as when you try to install some software, run a certain function or launch system built-in tools.

This is what the message usually states when it appears on your screen:

“An application error has occurred and an application error log is being generated. Exception: access violation (0xC0000005), Address “The application failed to initialize properly (0xC0000005). Click OK to terminate the application”.

The “Stop 0x0000008E (0xC0000005 …) ” combination on the blue screen

What may cause the Access violation error 0xC0000005?

The Windows OS is a complicated system, which is constantly performing multiple processes and tasks. To provide users with the best functionality, the system is constantly distributing memory between the running processes. However, when a particular program attempts to access memory, which is not available for its process and is distributed to another task, the Access violation error 0xC0000005 will occur and the program will quit.

Some common reasons that may cause this disturbing code to appear are related to registry issues, faulty RAM, corrupted drivers, DEP function, a virus infection, failed system security update and many more. If you are using some third party applications, (Symantec Antivirus software was known to cause  the error 0xC0000005), they may also be a reason for the “Access violation error” message to appear and you should update them or contact their developers to get rid of the error. In fact, it is difficult to tell exactly what caused it, that’s why you may need to try different solutions in order to have it solved. Below, we have listed a few, which may be of help, so take a look at them.

Error 0xc0000005 Fix

The Guide

Solution 1: Scan your system for viruses

In case that your computer is infected with some virus or other malware, the 0xC0000005 error may indicate that it is preventing some malicious programs from executing their actions. In many cases, this is one of the common reasons for the “Access violation error” to appear. That’s why we advise you to first run a full system scan to your machine with reputed antivirus software. Don’t forget to get all security updates and latest virus definition to ensure full protection and a precise scan.

Solution 2: Repair the registry

Sometimes, corrupted registry entries and poor system maintenance may cause this error to appear. If you frequently install or uninstall software over old one without properly deleting or uninstalling the remaining files, this may cause some system malfunctions, including error 0xC0000005. To fix it, you will have to check the registry entries and delete all invalid and remaining entries. However, bear in mind that messing with the registry requires some advanced computer skills and if you don’t know what you are doing, it is best to give that task to the computer experts rather than corrupt your system by yourself. Or, you can use some third-party software that is able to repair corrupted registry automatically instead of you repairing it manually. There are such programs on the Internet, and most of them can do a good job.

Solution 3: Disable DEP (Data Execution Prevention)

Data execution prevention is a set of security features, available for Windows users, which is designed to prevent code execution from non-executable memory segments. Usually, its main task is to check memory and protect the computer from viruses. However, some programs may have a conflict with the DEP if it is enabled, which may cause the 0xC0000005 error.

If DEP is the reason for your error code, we suggest you contact the developer of the program that is causing the conflict and ask them for a solution. Another option is to disable DEP for that particular program. This can easily be done if you follow the steps below:

• First, log into the computer as an Administrator in order to have full administrative rights.
• Next, if you are using Windows XP, click the “Start” button and select “Run“. If you are using Windows 7, just press the Windows and R keys together. A run box will open and there you need to type sysdm.cpl and click “OK”.
• Then, a System Properties window will open, where you will need to click on the Advanced tab and then go to Settings.
• Next, the “Performance Options” window will open where you need to click on the “Data Execution Protection” tab. Once there, select the option “Turn on DEP for all programs and services except those I select” and click the “Add” button.
• Now you will need to browse files from the Open applet in order to find the .exe files of the program, that  is causing the error code. Once you find it, select it and click the “Open” button.
• Finally, click “Apply” and “OK” to make the changes take effect.

Solution 4: Remove bad RAM (Random Access Memory) memory

Many times, a bad or incompatible RAM may bring about the Access violation error. If you added a new RAM to your PC in your attempts to improve its performance, you may have started to receive the 0xC0000005. If you remove the memory and restart the computer, this may solve the issue. Before removing the RAM, however, turn off your PC and remove all cables and the battery. Or make sure that it is fully compatible with your computer model and specifications, because if it is not, various issues may appear.

Solution 5: Update Internet Explorer 6.0

Microsoft Internet Explorer 6.0 may also get you this error when you attempt to access an HTML file or web page. The IE browser may stop responding when the 0xC0000005 occurs, especially when the HTML document or website the browser tries to open includes SPAN tags, which are closed incorrectly. To solve this, you will need to update Internet Explorer or use other web browsers such as Google Chrome, Firefox, etc.

The application was unable to start correctly (0xc0000005)

Why do you get “The application was unable to start correctly (0xc0000005)” error message?

Usually, this error appears when you try to run a particular program on your computer, but instead of running, it gives you the following message:

“The application was unable to start correctly (0xc0000005). Click OK to close the application.”

It indicates that the program you are trying to open cannot start. This problem usually occurs because of the DLL, which supports running the program, is not complete, not signed or invalid. In this case even rebooting the system or reinstalling the program won’t fix the error. But here we have prepared for you some fixes that may help.

Fixes for “The application was unable to start correctly (0xc0000005)” error message.

The first thing we advise you to do if you are getting this error message is to scan your system for malware or virus infections and make sure that your computer is not infected. Also, check your RAM and HDD because a problem with them may prevent some programs from working normally. If the error is still present, you can try the following steps:

• First, press the Windows key and the R key together to open Run command.
• Next, type “Regedit” in the search box and press OK. The will open the Registry Editor window.
• Then, follow the path below to navigate to the entry “LoadAppInit_DLLs”:
  HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Windows\AppInit_Dlls
• Click on “LoadAppInit_DLLs” to open it and modify its value to 0 from 1. Click OK to confirm the changes.
• Finally, restart the computer and try to run the application causing the error. It should be able to start normally without the error code. 

Microsoft Office 0xc0000005

Why do you get the Microsoft Office 0xc0000005 Error code?

The 0xc0000005 Error code may appear when you try to install Microsoft Office but the installation fails to complete. The reasons for that may vary from system file corruption, some previous installation files are not removed completely, or the installation may be blocked by security software, etc. Sometimes even proxy settings or Internet connection may prevent MS Office from being installed. To solve that, try the solutions below:

Solution 1: Try to repair the corrupted files

• First, click the Start button and select “Control Panel”. Next, click on Programs and select Programs and Features.
• Select the Office program in the software list and click “Change“.
• Then, choose the “Quick Repair” option and click “Repair“. If “Quick Repair” does not resolve the problem, then try the “Online Repair” option.

Solution 2: Reset Internet Explorer Security settings

• First, click the Start button, type “inetcpl.cpl” in the search box and press Enter.
• This will open the “Internet Properties” window, in which there is a “Security” tab. Click on it.
• Next, click on “Reset all zones to default level” button and click OK. This should get the error message solved.

Solution 3: Disable Proxy

• First, you will need to open the Command Prompt. Press the Windows and R keys together and type “cmd” in the Run box and click OK.
• In the Command Prompt type the following command: netsh winhttp import proxy source=ie
• Next, press Enter and if you get a message stating “Error writing proxy settings. (5) Access is denied”, this means that you should disable the Proxy settings in Internet Explorer.
• For that, launch Internet Explorer, click the Tools button and then the Internet Options.
• Next, click the Connections tab and select “LAN settings“. Choose “Use a proxy server for your LAN“.
• Finally, type the address of the proxy server in the Address box and type the port number in the Port box. If your network demands separated address for different services ( HTTP, FTP, etc.), click the Advanced button to enter the required addresses. Then click OK to save the changes.

Solution 4: Register DLL Dependencies

Sometimes, during Windows update or MS Office installation, the DLL (Dynamic Link Library) may get lost or not get registered normally in the system. To register the lost DLL, open the Run box by pressing the Windows and R keys together and simply type the following command:  regsvr32 Officevalidator.dll Click Ok and you will be good to go.

Did we help? If yes, please feel free to share this with others and if you know some other solutions for the 0xc0000005 Error code, we would love to hear about them in the comments below.

 

This guide will help you fix error “0x00000709 – “Can’t Set Default Printer Problem”. You can see this error in Windows 7 and 10 alike.

We have currently received many complaints of users, apparently experiencing  the “operation could not be completed error (0x00000709)”. Basically, this error code means that you have been unable to choose a default printer. No matter what you have done – uninstalling and reinstalling the printer’s drivers, all has appeared to be unsuccessful.

This repair guide is will work on all Windows versions. Just make sure that all the steps below are completed in a careful way. We hope you will find the information below useful and your problem will easily be solved.

Below is a guide with all the necessary instructions to get Error 0x00000709-  “Can’t Set Default Printer” fixed in a quick and rather easy manner.

Error 0x00000709 Fix

The Guide

1. Type“regedit”, then hit Enter in the “Search program and files” text box. This box appears right after you hit the Windows “start button” in the lower left section of your desktop.
2. The following step is to select the “ hkey_current_user ” on the left in the Windows registry editor.
   
3. After that, choose “Software”. The following choice you have to make is “Microsoft”. Finally, choose “Windows NT”.
4. Still being under the “Windows NT” entry, the “Current Version” is your next choice. The following one is “Windows”.
5. At that point, in the right-hand pane you should see an entry called “Device”. In case the value for “Device” is something different from the printer you want to make default, you should highlight “Device” with the mouse. After that push the Delete key and remove it.
6. Reboot your machine. It should be restarted with the changed Windows System R.

As soon as your Windows desktop comes up again, you should be able to reach the “Printers” section. From there you should be able to set your printer as the default one. The error message that had up until recently been bothering you should never appear on your screen again.

The opportunity to designate a default printer is very useful and could really spare you a great amount of time in the long run. You save time by NOT having to choose your destination printer every single time you want to use one. It will already be designated and set to be the default one. You should also remember that Windows is not to be blamed for these errors. Actually, it’s the printer manufacturer’s job to deal with the corrupted entries in the Windows system registry when a user ventures into uninstalling their software.

Nevertheless, getting such an error fixed is not the most complicated task. You just have to be extremely cautious and NOT alter anything else while making your changes. Changing something by mistake might result in very serious problems with your PC. Hopefully, this information has been helpful and you have dealt with this error via using our guide.

If you have other successful solutions in mind, please use the comment section to share them with us. We will be glad to update our guide with them and make them available to all the users that may possibly need it.

 

This guide will help you fix error “0x00000709 – “Can’t Set Default Printer Problem”. You can see this error in Windows 7 and 10 alike.

We have currently received many complaints of users, apparently experiencing  the “operation could not be completed error (0x00000709)”. Basically, this error code means that you have been unable to choose a default printer. No matter what you have done – uninstalling and reinstalling the printer’s drivers, all has appeared to be unsuccessful.

This repair guide is will work on all Windows versions. Just make sure that all the steps below are completed in a careful way. We hope you will find the information below useful and your problem will easily be solved.

Below is a guide with all the necessary instructions to get Error 0x00000709-  “Can’t Set Default Printer” fixed in a quick and rather easy manner.

Error 0x00000709 Fix

The Guide

1. Type“regedit”, then hit Enter in the “Search program and files” text box. This box appears right after you hit the Windows “start button” in the lower left section of your desktop.
2. The following step is to select the “ hkey_current_user ” on the left in the Windows registry editor.
   
3. After that, choose “Software”. The following choice you have to make is “Microsoft”. Finally, choose “Windows NT”.
4. Still being under the “Windows NT” entry, the “Current Version” is your next choice. The following one is “Windows”.
5. At that point, in the right-hand pane you should see an entry called “Device”. In case the value for “Device” is something different from the printer you want to make default, you should highlight “Device” with the mouse. After that push the Delete key and remove it.
6. Reboot your machine. It should be restarted with the changed Windows System R.

As soon as your Windows desktop comes up again, you should be able to reach the “Printers” section. From there you should be able to set your printer as the default one. The error message that had up until recently been bothering you should never appear on your screen again.

The opportunity to designate a default printer is very useful and could really spare you a great amount of time in the long run. You save time by NOT having to choose your destination printer every single time you want to use one. It will already be designated and set to be the default one. You should also remember that Windows is not to be blamed for these errors. Actually, it’s the printer manufacturer’s job to deal with the corrupted entries in the Windows system registry when a user ventures into uninstalling their software.

Nevertheless, getting such an error fixed is not the most complicated task. You just have to be extremely cautious and NOT alter anything else while making your changes. Changing something by mistake might result in very serious problems with your PC. Hopefully, this information has been helpful and you have dealt with this error via using our guide.

If you have other successful solutions in mind, please use the comment section to share them with us. We will be glad to update our guide with them and make them available to all the users that may possibly need it.